Test report Hioki LR8432
Hioki heat flow logger LR8432 used with Hukx heat flux + temperature sensors
The Hioki heat flow logger is easy and convenient in use. It can measure up to ten channels and display the data of heat flux, voltage and temperature simultaneously. Our test shows that the latest FHF sensors have excellent compatibility with the Hioki LR8432 data logger. FHF sensors are very versatile: integrated temperature sensor, thermal spreaders to reduce thermal conductivity dependence, applicable over a temperature range from –70 to +120 °C. The combined measurement of heat flux and temperature offers you a full picture of the thermal behavior of a system.
Introduction
Hukx offers a wide range of sensors for heat flux and temperature measurement. The thermopile heat flux sensor and thermocouple temperature sensor are both passive sensors; they do not require power.
Conclusion of testing
A total of five FHF sensors such as FHF05 series can be connected directly to the Hioki LR8432. The heat flux in W/m2 is calculated by dividing the heat flux sensor’s output, a small voltage, by its sensitivity. The sensitivity is provided with the sensor on its certificate and can be programmed directly into the data logger.
Specifications
Table 1 shows a summary of the most important specifications of the Hioki LR8432 when used with Hukx FHF05 series. Contact Hukx for a final check of your proposed solution.
Table 1 Most important specifications of Hioki LR8432 used with a Hukx FHF05 series.
| LR8432 | |
| no. of input channels | 10 |
| temperature | y |
| heat flux | y |
| voltage measurement accuracy | 0.1 x 10-6 V |
| estimated heat flux resolution with FHF05 | 0.01 W/m² |
| temperature measurement accuracy | ± 0.8 °C |
| wireless / bluetooth | n |
| battery powered use | y |
Getting started
The following text helps you to install the sensors to the data logger and get along. For more information see the sensor manual on our website or the Hioki user brochure. Visit also the Hukx YouTube channel for a quick introduction to heat flux or learn more about separation of radiation and convection.
Before use
- Charge the internal battery pack for 2.5 hours continuous use or use the AC adapter.
Step 1
Suggested wire connection of FHF05 series:
- Ch 1 +: red (heat flux +)
- Ch 1 -: black (heat flux -)
- Ch 2 +: thermocouple (type T +)
- Ch 2 -: thermocouple (type T -)
The channels 5 to 10 can be used for four (4) additional FHF sensors.
Step 2
Specify your measurement:
- describe the purpose of the experiment;
- estimate the output range of heat flux
- sensor in [× 10-6 V] and program it into the logger;
- for Ch 1 choose as input ‘heat’ and enter sensitivity of heat flux sensor;
- for Ch 2 select as input ‘Tc’ and then Type T for temperature measurements;
- repeat previous steps in case more sensors are used.
Step 3
Start your measurement:
- press the start button;
- heat flow and temperature are displayed simultaneously on the same screen;
- optimize using display settings.
Step 4
Store data:
- USB flash drive
- USB connection to computer
- CF Card
Suggested use
Heat flux + temperature sensors and loggers are used to analyse the cause of temperature change. The five models of FHF05 series are sensors for general-purpose heat flux measurements, often applied as part of a larger test- or measuring system. Also, they are used to validate mathematical CFD simulations. Read more about Hioki data logger LR8450 and FHF05 series in Battery EV Thermal management.
Related products
We like having a good technical conversation
Do you have questions, need help finding the right solution, or looking to discuss an instrument for a unique application? Our technical engineers provide expert advise. Contact us now!